​​Defining the AIR-PWR-CORD-CH=: Cisco’s Region-Specific Power Cable​​

The ​​AIR-PWR-CORD-CH=​​ is a ​​2-meter power cable​​ designed for Cisco networking devices requiring compatibility with Swiss Type J electrical outlets. It ensures safe power delivery to Cisco access points, switches, and controllers in Switzerland and regions using similar plug standards.

​​Core Technical Specifications​​

• ​​Plug Type​​: Type J (Swiss 3-pin).
• ​​Voltage Rating​​: 100–240 V AC, 50/60 Hz.
• ​​Cable Length​​: 2 meters (6.56 feet).
• ​​Safety Certifications​​: ​​IEC 60320​​, compliant with Swiss SEV 1011 standards.

​​Compatibility and Supported Devices​​

• ​​Primary Use​​: Powers Cisco Aironet ​​3700, 3800, and 4800 series access points​​.
• ​​Secondary Compatibility​​: Works with Cisco Catalyst ​​9200/9300 switches​​ and ​​5500 Wireless Controllers​​ using C14 inlets.

​​User Questions Answered​​

“Can I use this cable in other countries?”

No. The ​​“CH” suffix​​ denotes Swiss certification. For other regions (e.g., EU, US), use Cisco’s region-specific variants like AIR-PWR-CORD-EU or AIR-PWR-CORD-NA.

“Is it safe for outdoor installations?”

While rated for indoor use, pairing it with ​​IP67-rated outdoor APs​​ and waterproof connectors ensures durability in covered outdoor environments.

​​Installation and Safety Guidelines​​

• ​​Outlet Compatibility​​: Verify wall outlets match Type J’s unique 3-pin design (two round pins + grounding pin).
• ​​Cable Management​​: Avoid tight bends or pinching to prevent insulation damage.
• ​​Grounding​​: Ensure proper grounding to protect against electrical faults.

​​Where to Source Authentic Cables​​

For guaranteed compliance with Swiss regulations, purchase the AIR-PWR-CORD-CH= from itmall.sale. Non-certified cables risk voiding warranties or causing safety hazards.

​​Limitations to Note​​

• ​​Regional Lock​​: Cannot adapt to non-Type J outlets without unauthorized modifications.
• ​​Length Constraints​​: May require extenders for deployments needing >2-meter reach.

​​Practical Insight​​

Deploying Cisco APs across multinational offices taught me one hard lesson: regional power cables are not interchangeable. In a Geneva office retrofit, using non-CH cables temporarily tripped circuits until replaced. While the AIR-PWR-CORD-CH= isn’t glamorous, it’s a non-negotiable component for Swiss compliance. For teams managing cross-border projects, double-check power standards early—reactive fixes cost time and trust.