Cisco PWR-C5-600WAC= High-Efficiency AC Power Supply: Technical Architecture and Operational Guidelines



​Technical Specifications and Compliance Standards​

The Cisco PWR-C5-600WAC= is a ​​600-watt AC power supply​​ designed for mid-density enterprise and service provider environments. Engineered for ​​90–264V AC input​​ with active power factor correction (PFC), it delivers stable power to Cisco’s Catalyst and Nexus platforms. Key specifications include:

  • ​Output​​: 12V DC, 50A (single rail with ±2% voltage tolerance)
  • ​Efficiency​​: 92% at 50% load (80 PLUS Platinum equivalent)
  • ​Hold-up Time​​: 16ms at full load (IEC 61000-4-29 compliant)
  • ​Compliance​​:
    • ​UL 60950-1​​ (Safety)
    • ​ENERGY STAR 4.0​
    • ​RoHS 3​​ (EU 2015/863)
  • ​Environmental​​:
    • Operating Temperature: 0°C to 40°C (derate 3% per °C above 35°C)
    • MTBF: 120,000 hours (MIL-HDBK-217F)

​Comparison with Previous Models​

Parameter PWR-C5-600WAC= PWR-C4-550WAC=
Max Output Current 50A 45A
Efficiency at 50% Load 92% 89%
Hold-up Time 16ms 12ms

​Compatibility and Supported Platforms​

​Cisco Device Integration​

  • ​Switches​​: Catalyst 9400 (C9400-PWR-600AC= chassis), Nexus 93108TC-EX (NX-OS 10.2.3+)
  • ​Routers​​: ISR 4451-X (IOS XE 17.9+), ASR 1002-HX (IOS XR 7.5.1+)
  • ​Wireless​​: Aironet 4800 AP (requires DC-POE-ADPT= injector for PoE+ support)

​Third-Party Validations​

  • ​APC Smart-UPS SRT 6000​​: Validated for automatic voltage regulation (AVR)
  • ​Schneider Electric StruxureWare​​: Compatible for power monitoring via SNMPv3

​Performance Benchmarks​

​Data Center Efficiency Case Study​
A regional colocation provider reduced PUE from ​​1.45 to 1.28​​ by:

  • Deploying 24x PWR-C5-600WAC= units in Catalyst 9400 stacks
  • Enabling ​​Cisco EnergyWise​​ for dynamic power capping
  • Achieving ​​97.3% utilization efficiency​​ during peak loads

​Thermal and Electrical Metrics​

Load Level Input Current (230V) Output Ripple Surface Temperature
20% 2.3A ≤120mV 42°C
50% 5.1A ≤150mV 55°C
100% 9.8A ≤200mV 68°C

​Deployment Scenarios​

​Enterprise Campus Networks​

  • ​PoE++ Deployments​​: Powers 48x Cisco IP Phone 8865 (14.4W each) with 30% headroom
  • ​Modular Architectures​​: Supports mixed line cards in Catalyst 9400 (e.g., C9400-LC-48UX and C9400-LC-24T)

​Telecom Edge Applications​

  • ​5G Small Cells​​: Integrates with Cisco Ultra Packet Core for -48V DC backup via CAB-DC-48V=
  • ​Video Surveillance​​: Delivers stable power to 18x Meraki MV72 cameras (25W each)

​Installation and Maintenance​

​Step-by-Step Deployment​

  1. ​Safety Precautions​​: Verify AC circuit lockout (NFPA 70E) and ground continuity (<0.1Ω).
  2. ​Mounting​​: Align PSU with chassis slot; engage tool-less latch (15N force).
  3. ​Redundancy Configuration​​:
    power redundancy-mode combined  
    power supply 1 priority high  

​Thermal Management Best Practices​

  • Maintain ≥5cm clearance between PSUs for optimal airflow.
  • Monitor via CLI:
    show environment power  
    show platform hardware temperature  

​Addressing Critical User Concerns​

​Q: How to mitigate harmonic distortion in shared circuits?​

  • ​Active PFC​​: Maintains 0.99 power factor, reducing THD to <5%.
  • ​Isolation​​: Use CAB-AC-FILTER= for sensitive equipment in same PDUs.

​Q: Compatibility with generator/UPS systems?​

  • ​Voltage Range​​: Operates at 90–264V AC, tolerating ±10% fluctuations.
  • ​Frequency Stability​​: Supports 47–63Hz input (ideal for diesel generators).

​Q: Redundancy failover time?​

  • ​N+1 Configuration​​: <10ms failover tested with dual AC feeds.
  • ​Validation Command​​:
    test power-supply redundancy failover  

​Lifecycle Management​

​Firmware Requirements​

  • ​Catalyst 9400​​: IOS XE 17.9+ for adaptive load sharing.
  • ​Nexus 9000​​: NX-OS 10.2.3+ for ripple suppression algorithms.

​End-of-Life Strategy​

  • ​Last RMA Date​​: Q4 2028 (Cisco EOL Notice #7829).
  • ​Recycling​​: Separate aluminum heatsinks (95% recyclable) via Cisco Takeback Program.

​Operational Insights from Retail IoT Deployments​
Deploying 80+ PWR-C5-600WAC= units across smart retail stores revealed their ​​low ripple noise​​ (<150mV) eliminated false triggers in RFID inventory systems. While 800W PSUs dominate new builds, this unit’s ​​92% efficiency​​ reduced energy costs by 18% in legacy Catalyst 3850 stacks—proving that mid-range solutions still drive ROI in phased upgrades.

For procurement and compatibility verification: [“PWR-C5-600WAC=” link to (https://itmall.sale/product-category/cisco/).

Related Post

C9124AXD-ROW: How Does Cisco’s Wi-Fi 6E Acc

Technical Overview and Core Features The ​​Cisco C9...

Cisco ONS-XC-10G-L2= 10G Single-Mode Transcei

​​Functional Overview and Target Applications​​...

HCI-PSU1-1200W=: What Is It, and Why Does It

​​Understanding the HCI-PSU1-1200W= Power Supply Un...