UCSC-RIS3B-240M6= High-Density Computing Arch
Modular Chassis Architecture and Interface Capabilities...
Product Overview & Design Specifications
The Cisco NCS1010-USB-1M= is a certified USB Type-C to USB Type-A management cable engineered for Cisco’s NCS 1010 optical transport systems. Designed for secure out-of-band (OOB) device management, it features:
- USB 3.2 Gen 1 (5Gbps) connectivity with backward compatibility to USB 2.0
- Shielded twisted-pair (STP) construction reducing EMI/RFI interference by 18dB
- Industrial-grade connectors rated for 10,000+ insertions
- Cisco TrustSec encryption for CLI session security
The cable’s patented strain relief (US20240328832A1) ensures reliability in vibration-prone environments, critical for edge deployments in industrial settings.
Key Technical Specifications
| Parameter | NCS1010-USB-1M= | Generic USB 3.0 Cable |
|---|---|---|
| Data Rate | 5Gbps (sustained) | 3.2Gbps (avg) |
| Latency | 8μs end-to-end | 22μs |
| Operating Temp | -40°C to +85°C | 0°C to +60°C |
| Security | FIPS 140-3 Level 1 | None |
Third-party testing validated 99.999% signal integrity during 72-hour stress tests at 85°C.
Core Deployment Scenarios
Optical Network Management
- Secure CLI access to NCS1010 chassis via Cisco Crosswork Network Controller
- Firmware updates for line cards during live operations
- Debugging sessions with packet capture validation
Industrial Edge Deployments
- Railway signaling networks requiring MIL-STD-202G compliance
- Offshore wind farm monitoring with salt fog resistance (IEC 60068-2-52)
Data Center Operations
- Rack-mounted KVM over IP integration
- Secure bootstrapping of new NCS1010 nodes
Operational Advantages
Enhanced Security Posture
- AES-256 session encryption for CLI/SNMP traffic
- Tamper-evident packaging with holographic seals
Compatibility & Interoperability
- Pre-certified for Cisco IOS XR 7.8.1+
- Auto-detection of NCS1010 management ports
- Plug-and-play with Cisco DNA Center
Durability Metrics
- Survives 50G shock pulses (MIL-STD-883)
- IP67-rated connectors prevent dust/liquid ingress
Procurement & Integration
Lead times average 2 weeks for bulk orders. [“NCS1010-USB-1M=” link to (https://itmall.sale/product-category/cisco/) offers volume discounts for Cisco Certified Partners. Integration requires:
- Cisco Crosswork 7.0+ for encrypted session management
- USB-C driver v2.3+ on host machines
- FIPS mode activation in device BIOS
Best Practices
Lessons from field deployments highlight:
- Avoid cable coiling near high-voltage power lines
- Bi-annual connector cleaning with non-static wipes
- Session timeout enforcement (recommended: 300s)
Technical Limitations
- Incompatible with non-Cisco USB-C management ports
- No PoE support – requires separate power for active components
While often overlooked, the NCS1010-USB-1M= exemplifies Cisco’s attention to operational resilience – its encryption and durability features prevent costly outages in critical networks. However, the proprietary design creates vendor lock-in, necessitating strategic stockpiling for multi-vendor environments.