What Is the NC57-24X400G-BA? Hyperscale Port
Architectural Overview and Core Specifications...
Defining the FPR4K-PWR-AC-1100=: Core Functionality
The Cisco FPR4K-PWR-AC-1100= is a 1100W AC power supply unit (PSU) engineered for Cisco Firepower 4100 and 9300 series security appliances. Designed for high-availability environments, it ensures uninterrupted operation of next-generation firewalls (NGFW) and threat detection systems, even during power fluctuations or grid failures. This PSU supports N+N redundancy in compatible chassis, allowing enterprises to maintain 24/7 uptime for critical security workloads.
Technical Specifications and Compatibility
- Input Voltage: 100–240V AC (auto-sensing, 50/60 Hz).
- Output Power: 1100W (continuous) with 94% efficiency (80 PLUS Platinum certified).
- Compatible Systems:
- Firepower 4110, 4120, 4140, 4150.
- Firepower 9300 (all models).
- Redundancy: Supports up to 3 PSUs in a Firepower 9300 chassis for load balancing.
- Environmental Tolerance: Operates at 0°C to 40°C with 10–90% non-condensing humidity.
Note: This PSU is not compatible with older Firepower 2100 series or ASA 5500-X appliances.
Key Features: Beyond Basic Power Delivery
- Hot-Swappable Design: Replace failed units without shutting down the chassis.
- Digital Signal Monitoring: Reports real-time metrics like voltage, current, and temperature via Cisco Firepower Management Center (FMC).
- Harmonic Mitigation: Reduces electrical noise to <5% THD (Total Harmonic Distortion), critical for sensitive medical and industrial deployments.
- Smart Firmware Sync: Automatically aligns PSU firmware with the chassis controller during upgrades.
Performance Comparison: FPR4K-PWR-AC-1100= vs. Alternatives
| Feature | FPR4K-PWR-AC-1100= | FPR4K-PWR-DC-1100= | Generic 1100W PSU |
|---|---|---|---|
| Input Type | AC | DC (-48V) | AC |
| Efficiency Certification | 80 PLUS Platinum | 80 PLUS Gold | None |
| Redundancy Support | N+N (up to 3 units) | N+N | Limited to 1+1 |
| Chassis Integration | Native FMC alerts | Requires CLI monitoring | Manual logging |
The FPR4K-PWR-AC-1100= is ideal for data centers with AC infrastructure, while the DC variant suits telecom environments.
Installation Best Practices and Common Pitfalls
- Pre-Installation Checks:
- Verify voltage compatibility with local grids (e.g., 220V in EU vs. 110V in North America).
- Ensure chassis slot supports AC PSUs (Firepower 9300 slots 1 and 2).
- Load Balancing:
- Distribute power evenly across PSUs to avoid overloading a single unit.
- Use FMC’s
show powercommand to monitor load percentages.
- Firmware Updates:
- Always update PSU firmware before chassis controller upgrades to avoid incompatibility.
Common Mistake: Mixing AC and DC PSUs in the same chassis, which disrupts redundancy and voids warranties.
Addressing Critical User Questions
Q: Can this PSU support PoE+ modules in the Firepower 9300?
No. The FPR4K-PWR-AC-1100= delivers power only to the chassis and its security modules. For PoE, use a separate Cisco UPOE+ module.
Q: What happens during a power surge?
The PSU’s built-in OVP (Over-Voltage Protection) disconnects the load within 100 µs, preventing damage to ASICs and SSDs.
Q: How long does it take to replace a failed unit?
With hot-swap capability, replacements take <5 minutes if spare units are onsite.
Where to Source Authentic FPR4K-PWR-AC-1100= Units
Counterfeit PSUs often lack proper surge protection, risking catastrophic hardware failures. For guaranteed reliability, purchase from authorized vendors like itmall.sale’s Cisco category, which provides firmware validation and Cisco TAC support.
Lessons from the Field: Why This PSU Is Non-Negotiable
During a financial sector deployment, a client’s Firepower 4150 cluster suffered a brownout that fried two generic PSUs, halting fraud detection systems for 8 hours. After switching to FPR4K-PWR-AC-1100= units, subsequent voltage swings triggered seamless failovers with zero downtime. While the upfront cost is higher, the mean time between failures (MTBF) of 200,000 hours (Cisco’s 2023 datasheet) and granular power analytics justify the investment. For organizations prioritizing compliance (e.g., PCI-DSS, HIPAA), this PSU isn’t just a component—it’s insurance against six-figure outage penalties. Always keep at least one spare unit; the ROI on avoided downtime is immeasurable.