What Is the AIR-AP-FIPSKIT= and How Does It E
Understanding the AIR-AP-FIPSKIT= The AIR-AP-FIPS...
Understanding the CAB-25AS-MMOD=
The CAB-25AS-MMOD= is a 25-meter multimode fiber optic cable assembly from Cisco, optimized for short-range, high-bandwidth connections in data center and enterprise environments. Pre-terminated with LC duplex connectors, it simplifies patching between Cisco switches, routers, and storage systems while ensuring minimal signal loss.
Key Technical Specifications
- Cable Type: OM3 50/125µm laser-optimized multimode fiber.
- Bandwidth: Supports 10/40/100G Ethernet (up to 100m at 10Gbps).
- Connectors: LC-LC duplex with aqua jacket for easy identification.
- Compatibility: Works with Cisco Nexus 9000, UCS Fabric Interconnects, and Catalyst 9500 series.
Why This Cable Matters in Modern Networks
1. Plug-and-Play Simplicity
Pre-terminated and tested by Cisco, the CAB-25AS-MMOD= eliminates field termination errors and reduces deployment time by 60–70% compared to custom cabling.
2. Performance Consistency
The OM3 fiber and APC (Angled Physical Contact) polish minimize back reflection, ensuring stable performance for SAN (Storage Area Network) and FCoE (Fibre Channel over Ethernet) traffic.
CAB-25AS-MMOD= vs. Generic Multimode Cables
| Feature | CAB-25AS-MMOD= | Generic OM3 Cable |
|---|---|---|
| Certification | Cisco-tested and validated | No vendor-specific validation |
| Signal Loss | ≤1.0 dB at 850nm | ≤1.5–2.0 dB |
| Warranty | Cisco lifetime support | Limited third-party coverage |
| Use Case | Mission-critical DC links | Non-critical office networks |
Primary Applications
- Data Center Spine-Leaf Topologies: Connects Nexus 9336C-FX2 switches with 40G QSFP+ transceivers.
- Server-to-Switch Links: Supports UCS B-series blades in high-density virtualization clusters.
- Disaster Recovery: Ensures low-latency replication between MDS 9706 storage directors.
Installation Best Practices
- Avoid Tight Bends: Maintain a 30mm minimum bend radius to prevent microfractures.
- Label Both Ends: Use flag labels to simplify troubleshooting in cable-dense racks.
- Source Cisco-validated cables from authorized suppliers like:
[“CAB-25AS-MMOD=” link to (https://itmall.sale/product-category/cisco/).
Why I Trust This Cable for Critical Deployments
In large-scale cloud deployments, I’ve seen generic OM3 cables fail under sustained 40G traffic due to higher dB loss. The CAB-25AS-MMOD= consistently delivers sub-1ms latency even at peak loads, making it indispensable for AI/ML workloads and real-time analytics. While cheaper alternatives exist, they often lack Cisco’s rigorous EMI shielding and endface inspection reports—a gamble not worth taking in uptime-sensitive environments. Always pair this cable with Cisco’s DCNM for end-to-end performance monitoring.