C9200-24T-10E: What Are Its Features? 10G Uplinks, Use Cases, and Deployment Considerations

​​Core Technical Specifications​​

The ​​C9200-24T-10E​​ is a Cisco Catalyst 9200 Series switch designed for high-performance non-PoE environments. It features ​​24x 10/100/1000BASE-T Ethernet ports​​ and ​​4x 10G SFP+ uplinks​​, delivering ​​140 Gbps switching capacity​​. Key specifications include:

• ​​Stacking​​: ​​Cisco StackWise-160​​ for 160 Gbps stack bandwidth
• ​​Resiliency​​: ​​Dual hot-swappable power supplies​​ (AC or DC) and ​​field-replaceable fans​​
• ​​Security​​: Integrated ​​Cisco DNA Center​​ management, ​​MACsec encryption​​, and ​​Cisco TrustSec microsegmentation​​

​​How Does It Compare to the C9200-24PXG-A++?​​

While both are 24-port Catalyst switches, the ​​C9200-24T-10E​​ focuses on ​​cost-effective, non-PoE connectivity​​:

• ​​Power​​: No PoE support vs. 2.2 kW PoE++ on the 24PXG-A++
• ​​Uplink speed​​: 10G SFP+ vs. 25G SFP28 on the 24PXG-A++
• ​​Use case focus​​: Ideal for ​​core/distribution layers​​, ​​data center edge​​, or ​​ISP backhauls​​ vs. power-intensive access layer deployments

​​Primary Deployment Scenarios​​

​​Enterprise network cores​​: Aggregates traffic from access switches (e.g., PoE-enabled C9200-24PB-A) with ​​10G uplinks​​ for low-latency inter-VLAN routing.

​​Service providers​​: Acts as a ​​BNG (Broadband Network Gateway)​​ for fiber-to-the-home (FTTH) deployments, leveraging ​​Cisco IOS XE SDN flexibility​​.

​​Cloud edge​​: Supports hybrid cloud connectivity with ​​VXLAN EVPN​​ and ​​Cisco SD-Access​​ integration for seamless workload migration.

​​Addressing Critical Buyer Questions​​

​​Q: Can it support Multi-Gigabit speeds?​​
A: No. The ​​1G Base-T ports​​ are limited to 1 Gbps—for Multi-Gig, consider the ​​C9200-24PXG-A++​​ with 2.5/5/10G ports.

​​Q: How does StackWise-160 benefit small networks?​​
A: Enables ​​mixed stacking​​ with other Catalyst 9200 switches (e.g., C9200-48T) for simplified management and ​​hitless software upgrades​​.

​​Q: Is MACsec necessary without PoE?​​
A: Yes. ​​MACsec 256-bit encryption​​ secures traffic between switches and routers, critical for HIPAA/PCI-DSS compliance in financial or healthcare cores.

​​Sourcing and Configuration Tips​​

Purchase the ​​C9200-24T-10E​​ through authorized vendors like [“C9200-24T-10E” link to (https://itmall.sale/product-category/cisco/). Pair with ​​C9300 switches​​ for scalable spine-leaf architectures and enable ​​Cisco Advanced Malware Protection (AMP)​​ for threat visibility.

​​Final Thoughts on Strategic Deployment​​

The ​​C9200-24T-10E​​ excels in budget-conscious core networks, but its ​​lack of Multi-Gig​​ limits future-proofing. In ISP deployments, I’ve seen teams misuse its 10G uplinks for direct customer handoffs—always use a dedicated ​​ASR 9000​​ for that role. While its ​​dual PSUs​​ ensure uptime, configure ​​power redundancy mode​​ (not combined) to avoid single-point failures. For enterprises, pairing it with ​​C9200L-48T-4X​​ as access switches creates a resilient hierarchy, but ensure ​​Storm Control​​ is enabled to prevent broadcast floods from overwhelming the 10G uplinks.