VNOM-3P-V01= Network Operations Module: Centr
VNOM-3P-V01= in Cisco’s Enterprise Networking A...
The AIR-ANT2547V-N-HZ= is a 5 GHz directional antenna from Cisco’s Aironet portfolio, tailored for high-density wireless deployments requiring focused signal propagation. Unlike omnidirectional models, this antenna’s 60-degree horizontal beamwidth concentrates RF energy to minimize interference and maximize throughput in environments like conference halls, auditoriums, or outdoor point-to-point links.
Scenario 1: Deploy this antenna in long corridors or outdoor bridges where directional focus prevents signal spillage. Omnidirectional antennas (e.g., AIR-ANT2450V-N=) waste energy in such setups.
Scenario 2: Its 7 dBi gain is ideal for medium-range coverage (up to 150 meters indoors) with controlled radiation patterns. Higher-gain antennas (e.g., 10 dBi) may overshoot nearby clients.
Q: Can it support 2.4 GHz devices?
A: No. This antenna is exclusively optimized for 5 GHz networks. For dual-band setups, pair it with a 2.4 GHz antenna.
Q: Is it weatherproof for permanent outdoor installation?
A: While UV-resistant, it lacks an IP rating for heavy rain or dust. Use Cisco’s AIR-ANT2547V-N= (with “-N=” suffix) for fully outdoor-rated deployments.
Q: How many clients can it handle simultaneously?
A: Depends on the access point, but directional focus typically supports 80-100+ clients in high-density zones with minimal packet collision.
Cisco’s licensing terms mandate purchasing through authorized channels. Verify stock and pricing for AIR-ANT2547V-N-HZ= at itmall.sale. Counterfeit antennas often fail RF compliance tests, risking network performance penalties.
In warehouse deployments, I’ve used the AIR-ANT2547V-N-HZ= to segment coverage zones for forklift-mounted devices and inventory scanners. Its directional precision eliminated cross-aisle interference, which omnidirectional antennas exacerbated. However, alignment is critical—even a 10-degree tilt can create dead spots. For mixed environments, combining this with a low-gain omnidirectional antenna balances coverage and capacity. Always test radiation patterns with a spectrum analyzer post-installation.