What Is the CBL-R1B-SD-240-D=? Technical Insi
Core Specifications of the CBL-R1B-SD-240-D=...
Overview of the AIR-ANT2513P4M-NS=
The AIR-ANT2513P4M-NS= is a Cisco 2.4GHz omnidirectional dipole antenna optimized for indoor wireless networks. Designed to complement Cisco Aironet access points, it provides balanced coverage in office spaces, hospitals, and educational campuses where consistent signal distribution is essential.
Key Technical Attributes
- Frequency & Gain: Operates at 2.4GHz with a 4dBi gain, ideal for 802.11b/g/n networks requiring moderate range and penetration through walls.
- Polarization: Dual-slant polarization (±45°) enhances signal reception for devices in varied orientations.
- Compatibility: Certified for Cisco Aironet 1600, 1800, 2800, and 3800 Series access points, ensuring firmware alignment and performance stability.
Addressing Common Deployment Questions
Q: Can this antenna replace higher-gain models for large spaces?
A: While the 4dBi gain suits mid-sized areas (~10,000 sq. ft.), warehouses or multi-floor buildings may require directional antennas (e.g., AIR-ANT2460NP-R=) for focused coverage.
Q: Does polarization affect BYOD performance?
A: Yes. The ±45° polarization reduces signal nulls when devices like smartphones or tablets are held at angles, improving throughput for mixed-device environments.
Installation Guidelines
- Mounting Height: Install 7–15 feet above floor level to avoid obstructions like furniture while minimizing overlap with metal objects.
- Cable Management: Use low-loss RP-TNC cables (e.g., AIR-CAB050LL-R=) to prevent signal degradation over extended runs.
- Regulatory Compliance: Adheres to FCC/ETSI standards, but always verify local RF regulations before deployment.
Where to Purchase Reliable Units
Counterfeit antennas risk network performance and compliance. For guaranteed authenticity, source the AIR-ANT2513P4M-NS= exclusively through trusted suppliers like [“AIR-ANT2513P4M-NS=” link to (https://itmall.sale/product-category/cisco/).
Practical Insight
After deploying this antenna in a university library plagued by dead zones, I observed a 40% reduction in client connection drops. While some teams default to higher-gain antennas, the AIR-ANT2513P4M-NS= proves that precision in polarization and placement often outweighs raw power—especially in dense, device-heavy indoor environments. Cutting corners with uncertified antennas inevitably leads to support headaches, making Cisco’s engineered solutions a baseline for reliable Wi-Fi.