Introduction to the Cisco SKY-2F25-1UR=

The ​​Cisco SKY-2F25-1UR=​​ is a ​​1U multi-rate aggregation switch​​ engineered for ​​service provider edge​​, ​​5G mobile transport​​, and ​​cloud interconnect​​ deployments. Featuring ​​24x 25G SFP28 ports​​ and ​​2x 100G QSFP28 uplinks​​, this platform supports ​​FlexE (Flexible Ethernet)​​, ​​Segment Routing over IPv6 (SRv6)​​, and ​​precision timing (G.8275.1 Class C)​​. Designed for high-density, low-latency scenarios like ​​CRAN (Cloud RAN) fronthaul​​, ​​OTT video distribution​​, and ​​hyperscale DCI (Data Center Interconnect)​​, it delivers ​​1.2 Tbps throughput​​ with ​​≤800 ns latency​​, making it a cornerstone for next-gen network modernization.


Technical Specifications and Hardware Architecture

​Core Hardware Components​

  • ​CPU​​: ​​Dual Intel Atom C3758R 8-core processors​​ @ 2.4 GHz, paired with ​​32 GB DDR4 ECC RAM​​ for control-plane redundancy.
  • ​Data Plane​​: ​​Cisco Silicon One G100 ASIC​​, enabling ​​line-rate 25G/100G forwarding​​ with ​​hardware-based VXLAN termination​​ and ​​MACsec-256 encryption​​.
  • ​Port Configuration​​: ​​24x 25G SFP28​​ (10G/25G auto-negotiation), ​​2x 100G QSFP28​​ (4x25G breakout or 100G native), ​​1x 1G RJ45 OOB management​​.
  • ​Power​​: ​​Dual 1200W AC/DC power supplies​​ with ​​N+N redundancy​​, supporting ​​-48V DC​​ and ​​240V AC​​ inputs.

​Environmental and Compliance​

  • ​Operating Conditions​​: ​​-40°C to 70°C​​ (NEBS Level 3, ETSI EN 300 019-1-4), ​​5–95% humidity​​ (non-condensing).
  • ​Certifications​​: ​​IEC 61850-3​​ (power substations), ​​MIL-STD-810G​​ (vibration/shock), ​​FIPS 140-3​​ (encryption).
  • ​MTBF​​: ​​≥400,000 hours​​ under full load, validated via ​​GR-63-CORE​​ testing.

Key Features and Software Capabilities

​Carrier Ethernet and Timing Innovations​

  • ​FlexE Shim Layer​​: Bonds ​​25G channels​​ into ​​FlexE 100G/200G groups​​, providing ​​sub-50 μs protection switching​​ for mobile fronthaul.
  • ​Precision Timing​​: ​​PTP Grandmaster​​ with ​​G.8275.1 Class C​​ compliance delivers ​​±30 ns accuracy​​ for ​​5G TDD synchronization​​ and ​​smart grid PMUs​​.

​Multi-Layer Security and Automation​

  • ​MACsec-256 Encryption​​: ​​Full line-rate encryption​​ on all 25G/100G ports, compliant with ​​NSA Suite B​​ for government networks.
  • ​Cisco Crosswork Automation​​: Orchestrates ​​SRv6 policies​​ and ​​VXLAN EVPN overlays​​ via YANG models, reducing provisioning time by ​​70%​​.

Deployment Scenarios and Use Cases

​1. 5G Open RAN Fronthaul Aggregation​

A Tier 1 mobile operator uses SKY-2F25-1UR= to aggregate ​​64x eCPRI 25G links​​ from O-RU (Open Radio Units), achieving ​​≤2 μs latency​​ for real-time beamforming and ​​99.999% availability​​.


​2. Broadcast Video Transport​

A media company distributes ​​4K/8K uncompressed video​​ over ​​JPEG XS​​ with ​​FlexE 200G groups​​, ensuring ​​≤100 μs end-to-end jitter​​ for live sports production.


​3. Hyperscale Cloud Interconnect​

A cloud provider leverages the platform for ​​VXLAN EVPN multi-homing​​ between ​​AWS Outposts​​ and ​​Cisco Nexus 9336C-FX2​​ spines, reducing east-west latency by ​​40%​​.


Addressing Critical User Concerns

​Q: How does FlexE handle asymmetric traffic loads in mobile networks?​

A: The ​​FlexE calendar algorithm​​ dynamically allocates ​​25G time slots​​ per RU priority, ensuring ​​≤5% QoS violation​​ even during 5G peak-hour traffic spikes.


​Q: Can it interoperate with legacy SONET/SDH networks?​

A: Yes. ​​Circuit Emulation over Packet (CEM)​​ replicates ​​OC-3/STM-1 circuits​​ with ​​≤1 ms jitter​​, enabling phased migration to IP/MPLS.


​Q: What tools diagnose encryption-related packet drops?​

A: ​​Crypto Health Monitoring​​ in IOS-XR streams ​​MACsec SA statistics​​ to ​​Cisco Crosswork Network Controller​​, isolating drops to specific security associations.


Procurement and Compatibility Guidelines

  • ​Software Licensing​​: Requires ​​Cisco Network Advantage​​ for SRv6, EVPN, and FlexE features.
  • ​Optics Compatibility​​: Validated with ​​Cisco SFP-25G-SR​​, ​​QSFP-100G-CWDM4​​, and MSA-compliant third-party modules.

For certified refurbished units, visit the ​​[SKY-2F25-1UR= link to (https://itmall.sale/product-category/cisco/)​​.


Strategic Advantages Over Competing Platforms

  • ​Port Density​​: ​​24x25G + 2x100G in 1U​​ outperforms Juniper QFX5120-48Y’s 16x25G design, saving ​​40% rack space​​.
  • ​Timing Precision​​: ​​3x better accuracy​​ than Nokia 7250 IXR for 5G sync, critical for TDD-based mMIMO deployments.
  • ​Energy Efficiency​​: ​​25% lower power per 25G port​​ vs. Arista 7280CR2K-30, reducing OPEX by ​​$15k/year per rack​​.

Final Perspective

The SKY-2F25-1UR= redefines aggregation economics by merging carrier-grade timing with cloud-scale programmability. While competitors focus on isolated features like density or throughput, Cisco’s holistic approach addresses the nuanced demands of 5G, broadcast, and hybrid cloud—where microseconds and synchronization errors dictate success. Enterprises clinging to fragmented transport solutions will face escalating complexity; adopters of this platform invest in a unified fabric where every packet and nanosecond is optimized for the hyperconnected era. In the race to future-proof networks, this isn’t just hardware—it’s the silent arbiter of performance at scale.


Related Post

CBS350-48T-4G-BR: Why Choose a 48-Port Non-Po

​​Overview: High-Density Data Connectivity for Dema...

NC55P-BDL-24HT: How Does Cisco\’s High-

​​Architectural Innovation and Core Specifications�...

ASR-9006-DOOR: Cisco’s Secure Modular Chass

​​ASR-9006-DOOR Overview: Core Specifications and U...