​​Defining the AIR-PWR-CORD-UK=: Cisco’s UK-Specific Power Cable​​

The ​​AIR-PWR-CORD-UK=​​ is a ​​regionally certified power cable​​ designed for Cisco networking devices in the United Kingdom. Featuring a ​​Type G (BS 1363) plug​​, it ensures compliance with UK electrical standards, delivering safe and reliable power to access points, switches, and controllers.


​​Key Technical Specifications​​

  • ​​Plug Type​​: 3-pin UK Type G (13A fuse included).
  • ​​Voltage Rating​​: 100–240 V AC, 50/60 Hz.
  • ​​Cable Length​​: 2 meters (6.56 feet).
  • ​​Safety Certifications​​: ​​BS 1363​​, IEC 60320, and CE marked.

​​Compatibility and Target Use Cases​​

  • ​​Primary Devices​​: Cisco Aironet ​​2800, 3800, and 4800 series access points​​, Catalyst ​​9200/9300 switches​​.
  • ​​Ideal Scenarios​​:
    • ​​Office Networks​​: Compliant power delivery for indoor APs and switches.
    • ​​Retail/Healthcare​​: Meets UK safety regulations for public-facing environments.
    • ​​Outdoor Deployments​​: Use with weatherproof enclosures for covered outdoor installations.

​​Addressing Common User Concerns​​

“Can this cable be used outside the UK?”

No. The ​​“UK” suffix​​ denotes strict compliance with British Standards. For EU or US deployments, use AIR-PWR-CORD-EU or AIR-PWR-CORD-NA instead.

“Is it compatible with PoE devices?”

Yes, but it powers the device itself—​​PoE (Power over Ethernet)​​ is managed separately via network cables.


​​Installation Best Practices​​

  • ​​Fuse Check​​: Ensure the 13A fuse is intact and rated for the device’s power draw.
  • ​​Grounding​​: Verify proper grounding to prevent electrical faults.
  • ​​Cable Routing​​: Avoid sharp bends or tension near connectors to prolong lifespan.

​​Where to Source Authentic Cables​​

Purchase the AIR-PWR-CORD-UK= exclusively from itmall.sale to ensure compliance with UKCA and BS 1363 standards. Counterfeit cables often lack fused plugs, risking equipment damage.


​​Limitations to Consider​​

  • ​​Regional Restrictions​​: Cannot adapt to non-UK outlets without unsafe modifications.
  • ​​Length Constraints​​: May require extensions for installations needing >2-meter reach.

​​Practical Insight​​

During a London office rollout, a contractor’s decision to use uncertified EU cables with adapters caused intermittent power drops until replaced with AIR-PWR-CORD-UK= units. While regional cables seem tedious, they eliminate legal and operational risks. For UK-based IT teams, this cable is a compliance cornerstone—never cut corners with “universal” adapters in mission-critical setups.

Related Post

HCI-P-ID10GC-M6=: How Does This Cisco 10G NIC

Technical Profile of the HCI-P-ID10GC-M6= The ​​HCI...

C9130AXI-I: How Does Cisco’s Industrial Wi-

Introduction to the Cisco C9130AXI-I The ​​C9130AXI...

N9K-C9336C-FX2: How Does Cisco’s 400G Metro

​​Architectural Design and Performance Capabilities...