​​What Is the CAB-AC-C5-SWI=?​​

The ​​CAB-AC-C5-SWI=​​ is a ​​region-specific AC power cable​​ designed for Cisco devices in Switzerland. Combining a ​​C5 “cloverleaf” connector​​ with a ​​Swiss SEV 1011 plug​​, it ensures compliance with Switzerland’s stringent electrical standards while powering low-to-mid voltage networking hardware. Tailored for Swiss commercial and industrial environments, it bridges Cisco equipment with the country’s unique power infrastructure.

​​Technical Specifications and Swiss Compliance​​

• ​​Power Rating​​: ​​10A at 250V AC​​, compatible with Switzerland’s 230V/50Hz grid.
• ​​Connectors​​: ​​IEC 60320 C5​​ (device end, cloverleaf) and ​​SEV 1011 Type 12​​ plug (Swiss 3-pin standard).
• ​​Compatibility​​: Certified for Cisco ​​Catalyst 9200/9300 switches​​, ​​Meraki MS225/250​​, and ​​ISR 1100 routers​​.
• ​​Safety Standards​​: Complies with ​​Swiss Low Voltage Directive (SLVD)​​ and ​​IEC 60950​​ for fire/electrical safety.

​​Why This Cable Matters in Swiss Installations​​

1. ​​Regulatory Alignment​​: Meets ​​SEV and ESTI certifications​​ required for commercial electronics in Switzerland.
2. ​​Voltage Optimization​​: Designed for 230V infrastructure, preventing underperformance in PoE+ devices like ​​Catalyst 9300-48P switches​​ with 30W IP phone loads.
3. ​​Durability​​: Reinforced insulation resists wear in high-humidity Alpine environments.

For example, a ​​Meraki MS225-48LP​​ in a Zurich co-working space requires this cable to safely connect to Swiss outlets without adapters or compliance risks.

​​Common Use Cases​​

• ​​Enterprise Networks​​: Powers Catalyst switches in Geneva-based corporate offices.
• ​​Retail IoT Deployments​​: Connects Meraki MS250 switches in Swiss shopping centers adhering to ESTI codes.
• ​​Telecom Edge Sites​​: Supports ISR 1100 routers in Swisscom or Sunrise Communications facilities.

​​Procurement and Deployment Best Practices​​

This cable is ​​not interchangeable with EU Schuko or Italian CEI plugs​​. Key checks include:

• Confirm facility voltage (​​230V AC required​​).
• Verify outlets follow ​​SEV 1011 Type 12​​ (flat 3-pin with grounding post).

For guaranteed compliance, source from authorized vendors like itmall.sale’s Cisco products.

​​Lessons from Swiss Network Upgrades​​

During a Basel deployment, non-compliant cables caused project delays until CAB-AC-C5-SWI= units were sourced. While indispensable locally, its ​​Swiss-specific plug complicates cross-border scalability​​—German or French sites require separate cables. For hybrid deployments, maintain region-specific spares and label them clearly. This cable exemplifies Cisco’s regional customization, but its value is fully realized only when paired with meticulous infrastructure planning and team training on Swiss standards.