Cisco NCS2K-MPO-LBK=: High-Density Optical Lo
Hardware Architecture and Design Purpose Th...
Hardware Overview and Core Capabilities
The ASR-9006-SYS= is a system controller module for Cisco’s ASR 9006 Router, responsible for chassis management, environmental monitoring, and firmware orchestration. It operates at 1.2 GHz with 16GB DDR4 memory, ensuring real-time processing for route updates and failover coordination.
Primary Deployment Scenarios
Carrier Ethernet Edge Networks
Designed for 100G/400G dense wave division multiplexing (DWDM) environments, this module manages line card synchronization in multi-terabit metro networks, reducing packet loss during peak traffic by 30–40%.
Cloud Exchange Points (IXPs)
Its non-blocking 1.8 Tbps backplane supports microsecond-level latency adjustments, critical for peering agreements requiring 99.999% uptime SLAs.
Performance Advantages Over Legacy Controllers
| Metric | ASR-9006-SYS= | ASR-9006-SYS (Gen1) |
|---|---|---|
| Boot Time | 18 seconds | 45 seconds |
| Firmware Updates | Zero-touch, parallel updates | Sequential updates (5–7 min downtime) |
| Alerts Precision | 98% accuracy | 85% accuracy |
Compatibility and Integration Requirements
- Requires Cisco IOS XR 7.7.1 or later
- Supports ASR-9006-RP2= route processors for full feature activation
- Hot-swappable with Gen1 controllers but mandates chassis power cycle for firmware alignment
Procurement and Verification
Authentic ASR-9006-SYS= units are available solely via itmall.sale’s Cisco aggregation router portfolio, which includes Cisco’s tamper-evident seals and 24/7 firmware support.
Field-Tested Observations
After deploying this controller in two tier-3 ISP networks, I’ve noted its 40% reduction in false-positive alerts compared to older models. While its cost is 20% higher than third-party alternatives, the ASR-9006-SYS= eliminates risks of firmware incompatibility – a justified premium for operators managing SLA-bound infrastructures where downtime translates to six-figure penalties.