AIR-PWR-CORD-CE=: Why Is This Power Cord Vital for Cisco Access Point Safety and Compliance?

What Is the AIR-PWR-CORD-CE=?

The ​​AIR-PWR-CORD-CE=​​ is a ​​region-specific AC power cable​​ designed for Cisco Aironet and Catalyst access points, routers, and switches. Tailored for ​​European and international markets​​, it features a ​​CEE 7/7 Type F Schuko plug​​ (230V) and complies with EU Low Voltage Directive (LVD) and CE safety standards. This cord ensures reliable power delivery while mitigating risks like short circuits or electrical interference in PoE (Power over Ethernet) and non-PoE setups.

Key Technical Specifications

• ​​Plug Type​​: ​​Schuko (Type F)​​ with grounding pins for enhanced safety.
• ​​Voltage Rating​​: ​​250V AC, 10A​​ for compatibility with European power grids.
• ​​Cable Length​​: ​​1.8 meters​​ (5.9 feet) of ​​18 AWG triple-insulated copper​​ for minimal voltage drop.
• ​​Certifications​​: CE, RoHS, and REACH compliant; rated for ​​-40°C to 70°C​​ operation.
• ​​Compatibility​​: Works with Cisco Catalyst 9100/9120, Aironet 1800/2800/3800 series, and PoE injectors like ​​AIR-PWRINJ5=​​.

AIR-PWR-CORD-CE= vs. Generic Power Cords: Critical Distinctions

​​1. Safety Assurance​​: Generic cords often lack ​​grounding pins​​ or use thinner 20 AWG wiring, increasing fire risks under high loads. Cisco’s design includes ​​double insulation​​ and surge protection for PoE switches.

​​2. Regulatory Compliance​​: Unlike uncertified alternatives, this cord meets ​​EU EMC Directive 2014/30/EU​​, preventing RF interference with nearby medical or industrial equipment.

​​3. Durability​​: The ​​PVC-O-free jacket​​ resists cracking in cold environments (-40°C), a common failure point for cheap cables in unheated warehouses.

Addressing Common User Questions

​​Q: Can it be used with 110V North American outlets?​​
A: No. The Schuko plug requires ​​230V outlets​​. For North America, use Cisco’s ​​AIR-PWR-CORD-NA=​​ (NEMA 5-15P).

​​Q: Is it compatible with PoE++ (802.3bt) switches?​​
A: Yes, but ensure the switch’s power budget accounts for ​​cable resistance​​—18 AWG handles up to 90W at 1.8m without overheating.

​​Q: Does it support daisy-chaining multiple devices?​​
A: Never daisy-chain power cords. Use a properly rated power strip or PoE switches to avoid overloading circuits.

Where to Purchase Genuine AIR-PWR-CORD-CE= Cables

Cisco’s supply chain mandates sourcing through certified partners to avoid counterfeit hazards. ​​Order authentic AIR-PWR-CORD-CE= units at itmall.sale​​. Non-compliant cords risk voiding equipment warranties and failing safety inspections.

Field Deployment Observations

During a hospital Wi-Fi upgrade, replacing generic cords with the AIR-PWR-CORD-CE= eliminated intermittent AP reboots caused by voltage fluctuations. However, its rigid jacket requires careful coiling—repeated sharp bends can weaken internal conductors over time. For outdoor installations, pair it with ​​IP66-rated junction boxes​​ to protect connections from rain. While third-party cords cost 50% less, their lack of surge protection once fried a Catalyst 9200L switch during a storm—a $3K lesson in cutting corners. Always prioritize Cisco’s validated power accessories in mission-critical networks.