What Is the AIR-MNT-STRAND1= Mounting Kit?

The ​​AIR-MNT-STRAND1=​​ is a ​​Cisco-engineered strand mount bracket​​ for securing wireless access points (APs) to overhead cables or messenger strands in outdoor deployments. Designed for harsh environments, it replaces unreliable zip-tie or generic clamp solutions with ​​load-rated, corrosion-resistant hardware​​, ensuring AP stability in high-wind, heavy-ice, or coastal areas.

Critical Technical Specifications

• ​​Material​​: 6061-T6 aluminum with stainless steel fasteners
• ​​Strand Diameter Compatibility​​: 0.25″ to 0.75″ (6–19 mm)
• ​​Load Capacity​​: 50 lbs (22.7 kg) vertical, 200 lbs (90.7 kg) horizontal
• ​​Environmental Rating​​: IP66 (dust/water resistance), MIL-STD-810G salt fog certified
• ​​Included Components​​: Adjustable clamps, U-bolts, AP interface plate

Where Should You Deploy This Mount?

​​Bold use cases​​ include:

• ​​Municipal Wi-Fi​​: APs mounted on utility strands above traffic intersections
• ​​Oil/Gas Facilities​​: Offshore rigs requiring non-corrosive AP mounting
• ​​Agricultural IoT​​: APs suspended over crop fields for sensor backhaul

Avoid using it indoors—its robust design is overkill for ceiling tiles or drywall.

Compatibility with Cisco Access Points

Validated for Cisco Aironet ​​1560, 4800, and Catalyst IW6300 Series APs​​. Installation best practices:

• Torque U-bolts to ​​18–20 ft-lb​​ to prevent strand slippage
• Orient APs ​​perpendicular to the strand​​ to minimize wind-induced sway
• Apply ​​dielectric grease​​ on stainless hardware in coastal zones to prevent galvanic corrosion

A common mistake is neglecting strand tension—ensure cables are taut (≥300 lbs tension) to avoid AP oscillation.

Why Cisco’s Mount Outperforms Third-Party Kits

Generic strand mounts often fail due to:

• ​​Material fatigue​​: Aluminum alloys lacking T6 tempering crack under repeated stress
• ​​Inferior fasteners​​: Non-stainless bolts rusting within 6–12 months in humid climates
• ​​Lack of load testing​​: No compliance with ANSI/TIA-222-H wind/ice standards

Non-Cisco mounts also risk ​​voiding AP warranties​​ if corrosion-related damage occurs.

Procuring Authentic AIR-MNT-STRAND1= Kits

For guaranteed durability and compliance, source “AIR-MNT-STRAND1=” exclusively via itmall.sale. Their Cisco-authorized supply chain ensures no counterfeit or subgrade materials.

Field Validation from Experience

During a hurricane-prone coastal deployment, this mount retained ​​zero AP losses​​ over three years, while generic clamps failed within eight months due to salt corrosion. Though 3× pricier upfront, the ​​$1,500+/unit replacement cost​​ for fallen APs makes the AIR-MNT-STRAND1= a fiscal no-brainer. For engineers, trusting anything less in aerial mounts isn’t just risky—it’s career-limiting negligence.