What Is CP-6800-PWR-UK=? Power Capacity, Comp
Overview of the CP-6800-PWR-UK= Power Supply The ...
Introduction to the Cisco 1783-MMS10A
The Cisco 1783-MMS10A is a 10-port managed industrial Ethernet switch built for demanding environments where temperature extremes, vibrations, and dust threaten network reliability. Part of Cisco’s Stratix 5000 series, it integrates Layer 2 management, Power over Ethernet (PoE+), and Cisco’s security framework to support industrial automation, energy, and transportation systems.
Key Technical Specifications
- Port Configuration: 8x 10/100/1000BASE-T PoE+ ports + 2x 1G SFP uplinks.
- Environmental Resilience: Operates in -40°C to 75°C with IP30-rated protection against dust and moisture ingress.
- Power Delivery: 30W per PoE+ port (IEEE 802.3at) to support high-power devices like pan-tilt-zoom (PTZ) cameras or wireless access points.
- Certifications: Complies with IEC 61850-3 (energy grids), IEEE 1613 (surge immunity), and ATEX Zone 2 (hazardous environments).
1783-MMS10A vs. Basic Industrial Switches
| Feature | 1783-MMS10A | Generic Industrial Switches |
|---|---|---|
| Network Redundancy | DLR (Device Level Ring) with <3ms failover | RSTP only (50ms+) |
| Security Protocols | MACsec, TACACS+, Secure Boot | Basic VLAN segmentation |
| Management Tools | Cisco IOS CLI, WebUI, and Edge Intelligence | Limited SNMP support |
Industrial Deployment Scenarios
- Oil & Gas Remote Sites: Survives extreme temperatures and provides secure, low-latency communication for SCADA systems.
- Railway Signaling Networks: Vibration-resistant design ensures stable connectivity for trackside sensors and cameras.
- Water Treatment Plants: Corrosion-resistant housing withstands humid or chemically aggressive conditions.
Addressing Common User Questions
Q: Can the 1783-MMS10A power devices beyond 30W per port?
No—the 30W PoE+ limit aligns with IEEE 802.3at standards. For higher demands, external injectors are required.
Q: Does it support legacy serial protocols like RS-485?
Yes—via optional serial-to-Ethernet converters (e.g., for legacy PLCs or meters).
Q: How is firmware updated in isolated networks?
Updates are delivered offline via Cisco’s Industrial Network Director or manual CLI uploads.
Sourcing the 1783-MMS10A
For cost-effective procurement of certified refurbished units, visit “1783-MMS10A”.
Final Analysis
The 1783-MMS10A is a compelling choice for industries prioritizing network uptime and cybersecurity over upfront cost savings. While cheaper alternatives exist, few match its combination of rugged hardware, seamless Cisco ecosystem integration, and compliance with industrial safety standards. For teams managing critical infrastructure, this switch mitigates risks that generic hardware simply can’t address.