Cisco ONS-FMPO-SM-10= Single-Mode MPO Trunk C
In high-capacity optical networks, achieving low-loss, ...
The Cisco UCS-SD240GBMS4-EV represents Cisco’s cost-optimized storage solution for read-centric applications in UCS C220/C240 M4 server environments. Engineered with 2.5-inch SATA 6Gbps interface, this SSD balances performance and endurance through three key design principles:
Third-party validation shows 3.2x higher random read performance versus 10K RPM SAS HDDs in VDI boot scenarios.
In standardized tests using Cisco UCS C240 M4 servers:
Workload Type | UCS-SD240GBMS4-EV | 10K SAS HDD | Delta |
---|---|---|---|
4K Random Read | 28,500 IOPS | 8,900 IOPS | +220% |
Sequential 128K Read | 520 MB/s | 180 MB/s | +189% |
Boot Time (UCS Manager) | 12.3 seconds | 34.7 seconds | -65% |
The drive’s Adaptive Read Caching 2.0 extends NAND lifespan by 42% through dynamic block allocation algorithms.
For optimal integration with Cisco UCS infrastructure:
Validate RAID Controller Compatibility:
ucs-storage # verify sata-drive raid1
Configure Wear-Level Monitoring:
ucs-monitor # enable ssd-wear-level threshold 80
Implement Thermal Management:
itmall.sale provides Cisco-certified UCS-SD240GBMS4-EV solutions with:
While 7.68TB NVMe drives dominate performance discussions, the UCS-SD240GBMS4-EV demonstrates that purpose-built SATA SSDs still deliver unmatched $/IOPS efficiency in read-intensive environments. Its 98.6% uptime metric at 70°C ambient conditions reveals a critical truth: enterprise storage reliability often depends more on thermal resilience than raw throughput specs. For organizations modernizing legacy HDD-based boot/streaming infrastructures, this drive represents not just a storage upgrade – it’s a thermodynamic optimization engine converting thermal headroom into operational continuity.