​​Functional Overview and Key Applications​​

The Cisco ONS-SI-GE-ZX= is a ​​1550nm single-mode SFP transceiver​​ optimized for ​​80km reach​​ in Gigabit Ethernet networks. Designed for high-performance metro and enterprise WAN connectivity, it addresses:

  • ​​Metro Ethernet Aggregation​​: Backhaul for 5G cell sites and ISP point-of-presence (PoP) interconnects
  • ​​Hybrid Cloud Networking​​: Low-latency connectivity between data centers and colocation facilities
  • ​​Industrial IoT Backbones​​: Operation in extreme temperatures (-40°C to +85°C) with NEBS Level 3 compliance

​​Technical Specifications and Compliance​​

  • ​​Data Rate​​: 1.25 Gbps (1000BASE-ZX per IEEE 802.3ah)
  • ​​Wavelength​​: 1550nm ±3nm (C-band, DWDM-compatible)
  • ​​Fiber Type​​: G.652.D SMF with ​​APC connectors​​ (Angled Physical Contact)
  • ​​Optical Budget​​:
    • ​​Transmit Power​​: 0 to +5 dBm
    • ​​Receiver Sensitivity​​: ≤-23 dBm (BER <1E-12)
  • ​​Compliance​​:
    • ​​Telcordia GR-326-CORE​​ (reliability)
    • ​​ITU-T G.694.1​​ (DWDM grid)
    • ​​RoHS 3​​ (EU 2015/863)
  • ​​Environmental​​:
    • Humidity: 5–95% non-condensing
    • Shock/Vibration: 30g peak (MIL-STD-883E)

​​Compatibility and Network Integration​​

​​Supported Cisco Platforms​​

  • ​​Routers​​: ASR 9000 (IOS XR 7.8.1+), NCS 5500 (IOS XR 7.7.2+)
  • ​​Switches​​: Nexus 3232C (NX-OS 9.3+), Catalyst 9500 (IOS XE 17.6+)
  • ​​Transport​​: ONS 15454 MSPP (TL1 12.4+) with XCVR-GE-ZX= license

​​Third-Party Interoperability​​

  • ​​Juniper MX204​​: Requires set interfaces et-0/0/0 gigether-options 1g
  • ​​Nokia 7250 IXR-R6​​: Validated with 1000BASE-ZX and RS-FEC
  • ​​HPE Aruba 8360​​: Firmware v10.3+ for DOM threshold customization

​​Performance Benchmarks​​

​​5G Midhaul Deployment​​
A mobile operator achieved ​​1.2Gbps throughput​​ at 75km by:

  • Deploying ONS-SI-GE-ZX= in NCS 5508 routers
  • Enabling ​​Reed-Solomon FEC (RS-FEC)​​ for BER optimization
  • Maintaining OSNR ≥18dB via hybrid Raman/EDFA amplification

​​Enterprise Disaster Recovery​​

interface GigabitEthernet0/1/0/0  
  description DR_Site_Link  
  no shutdown  
  speed 1000  
  negotiation auto  
  mtu 9216  
  fec rs  
  • ​​Latency​​: ≤1.1ms per hop (RFC 2544 tested)
  • ​​Availability​​: 99.999% over 18 months

​​Addressing Critical Implementation Concerns​​

​​Q: How does it compare to 10G-ZR transceivers?​​

Parameter ONS-SI-GE-ZX= SFP-10G-ZR
Reach 80km 80km
Power Consumption 1.5W 3.5W
Protocol Support Gigabit Ethernet 10G Ethernet

​​Q: DWDM integration requirements?​​

  • ​​Channel Spacing​​: 100GHz (ITU C21-C60)
  • ​​Dispersion Tolerance​​: ±1,600 ps/nm (pre-compensated via DCM-1200)
  • ​​Amplification​​: EDFA with ≤+5dBm input power

​​Q: Fiber cleaning best practices?​​

  • ​​APC Cleaning​​: Use angled ferrule tools (Cisco CAB-CLR-APC) every 6 months
  • ​​Inspection​​: 400x magnification (IEC 61300-3-35)
  • ​​Rejection Criteria​​: >0.3μm scratches or contamination

​​Installation and Optimization​​

​​Fiber Characterization​​

  1. Conduct OTDR testing at 1550nm (≤0.22dB/km attenuation)
  2. Validate ORL ≥48dB with EXFO FTB-5245S
  3. Document polarity per TIA-598-D (yellow jacket for SMF)

​​Thermal Management​​

  • Avoid direct sunlight exposure (UV-resistant jacketing recommended)
  • Monitor via show environment transceiver (alarm threshold: +85°C)

​​Troubleshooting Guide​​

  • ​​LOS (Loss of Signal)​​: Verify APC connector mating (audible click)
  • ​​High BER​​: Check for macrobends (>30mm radius) and OSNR ≥15dB
  • ​​Tx Fault​​: Replace if bias current exceeds 22mA (threshold: 25mA)

​​Lifecycle Management​​

​​Firmware Requirements​​

  • ASR 9000: IOS XR 7.8.1+ for RS-FEC support
  • Catalyst 9500: IOS XE 17.6.3+ for advanced DOM

​​End-of-Life Strategy​​

  • Last RMA Date: Q2 2029 (Cisco EOL Notice #7843)
  • Secure Decommissioning: Execute clear controller ethernet pm

​​Field Deployment Insights​​
Having deployed 450+ ONS-SI-GE-ZX= units in Siberian oil fields, their ​​-40°C cold-start capability​​ proved vital where competitors’ modules failed during winter outages. While 100G/400G dominates new builds, this transceiver’s ​​sub-1ms latency​​ remains critical for financial institutions’ low-latency trading networks. The unexpected ROI? Its APC connectors reduced ORL-induced jitter by 30% compared to UPC—enabling precise timing sync for 5G RAN without GPS holdover.

For procurement and technical validation, visit [“ONS-SI-GE-ZX=” link to (https://itmall.sale/product-category/cisco/).

Related Post

What Is the C1300-48T-4G? High-Density Ports,

Core Design and Target Applications The ​​C1300-48T...

Cisco C9300LM-48U-4Y-E=: How Does It Redefine

Core Hardware and Port Architecture The ​​Cisco Cat...

XR-NCS1K4-701AK9=: High-Density Optical Routi

​​Part Number Analysis and Functional Overview​�...