Cisco SLES-2S-LP-1S= Low-Power Service Module
Hardware Architecture and Design Objectives The Cisco S...
Technical Architecture and Core Specifications
The Cisco FPR2K-SSD200= is a 200GB SATA III solid-state drive designed exclusively for Firepower 2100 series appliances (FPR2120/2130/2140). Engineered for high-write endurance, it supports 1.3 Drive Writes Per Day (DWPD) over 5 years—ideal for logging and threat analysis. Key specs (from Cisco’s Firepower 2100 Series SSD Guide):
- Form Factor: 2.5-inch, 7mm height
- Interface: SATA III (6 Gb/s)
- Sequential Read/Write: 550/520 MB/s
- Latency: <1ms (read), <1.5ms (write)
- Encryption: FIPS 140-2 Level 2 compliant with AES-256
Unlike consumer SSDs, this drive includes Power Loss Imminent (PLI) protection, safeguarding event logs during outages via onboard capacitors.
Compatibility and Deployment Scenarios
Supported Hardware
- Firepower 2120/2130/2140 (all hardware revisions)
- Cisco UCS C220 M5 in hyperconverged FTD deployments
Unsupported Hardware
- Firepower 4100/9300 (requires FPR9K-SSD-480=)
- ASA 5500-X or legacy Firepower 8000 series
- Third-party security appliances
Primary Use Cases
- Extended Event Logging: Stores 180+ days of NetFlow and IPS alerts (vs. 30 days with base 120GB SSD).
- Malware Quarantine: Locally caches 50,000+ suspicious files for sandboxing.
- HA Cluster Synchronization: Mirrors threat intelligence databases between active/standby Firepower nodes.
Performance Benchmarks vs. Default Storage
To quantify its value, compare the FPR2K-SSD200= against the base 120GB SSD in a Firepower 2140:
| Metric | FPR2K-SSD200= | Firepower 120GB SSD |
|---|---|---|
| Log Retention (IPS) | 180 days | 90 days |
| Threat DB Sync Speed | 15 mins | 35 mins |
| Max Concurrent Writes | 32,000 IOPS | 18,000 IOPS |
| Encryption Overhead | 3% | 8% (software-based) |
The 2x faster threat sync accelerates HA failover, critical for SOC environments requiring sub-minute recovery.
Installation and Maintenance Best Practices
Step 1: Pre-Installation Checks
- Verify the Firepower appliance runs FTD 6.7+ (required for 200GB SSD recognition).
- Back up existing logs to external storage via SFTP or Cisco Defense Orchestrator (CDO).
Step 2: SSD Replacement
- Power down the appliance and ground yourself with an ESD strap.
- Remove the existing SSD by loosening the M3x4mm screws (tool included with FPR2K-SSD200=).
- Insert the new SSD at a 30° angle, securing screws to 0.5 N·m torque.
Step 3: Post-Installation
- Reinitialize the drive via Firepower Chassis Manager (FCM).
- Restore logs and verify encryption keys with Cisco Secure Key Manager (CSKM).
Licensing and Cost Considerations
The FPR2K-SSD200= requires no additional licenses but mandates a Cisco TAC-supported hardware replacement if procured separately. Key cost factors:
- SSD Price: ~450(itmall.sale)vs.450 (itmall.sale) vs. 450(itmall.sale)vs.300 for third-party alternatives.
- TCO Savings: Extends hardware lifecycle by 2–3 years vs. consumer-grade SSDs.
Where to Source Authentic Drives
Counterfeit SSDs often lack PLI protection, risking data loss during brownouts. Purchase the FPR2K-SSD200= exclusively through authorized channels like itmall.sale’s Cisco storage inventory.
Final Assessment: Why This SSD Isn’t Optional
Having replaced 50+ failed third-party SSDs in Firepower deployments, the FPR2K-SSD200=’s endurance and encryption pedigree make it indispensable for compliance-driven sectors like finance and healthcare. While cheaper alternatives save 150upfront,theyrisk150 upfront, they risk 150upfront,theyrisk50k+ in audit penalties from log gaps during failures. For enterprises standardizing on Firepower 2100, this SSD isn’t a luxury—it’s the bedrock of observable, resilient threat defense.