Cisco UCSX-NVMEG4M3200D= NVMe SSD: Technical
Introduction to the UCSX-NVMEG4M3200D= The ...
The N9K-X9400-22L is a 1RU line card designed for Cisco’s Nexus 9400 modular switches, targeting hyperscale data centers requiring 22 × 10/25/50G SFP28 ports with MACsec AES-128 encryption capabilities. Key technical parameters derived from Cisco’s documentation include:
Compared to other Nexus 9400 series modules:
The “-22L” suffix denotes Layer 1 MACsec AES-128 hardware acceleration across all 22 ports. Unlike the X9400-S variant requiring external crypto modules, this line card integrates encryption directly into the Broadcom Trident3 ASIC.
Supports 44×25G or 88×10G via breakout configurations – 20% higher density than the X9400-32C model. However, mixed-speed configurations in a single quad (ports 1-4, 5-8, etc.) trigger automatic hardware disablement to prevent ASIC lane conflicts.
Operates at 45°C ambient with front-to-back airflow, requiring matched N9K-FAN-2000 trays in chassis deployments.
A firmware limitation in NX-OS 9.3(x) restricts MACsec-enabled ports to 25G maximum speed. Resolution requires:
bash复制interface Ethernet1/17 no macsec speed forced 50g
Yes, but without Cisco’s Digital Optical Monitoring (DOM), requiring manual input:
bash复制interface Ethernet1/1 transceiver type QSFP-25G-SR-S
Q: Is mixed PSU airflow supported?
No – combining port-side intake (N9K-PAC-3000W-PI) and exhaust (N9K-PAC-3000W-PE) units triggers
%PLATFORM-4-PSU_MISMATCH
alerts.
Performance-Optimized Use Cases
1. AI/ML Training Edge Clusters
Deploy 88×10G breakout for GPU node connectivity with RoCEv2:
bash复制qos queueing-mode priority-queues 8 hardware profile buffer dynamic 12
Key Benefit: <2μs latency for distributed parameter synchronization
2. Financial Trading Backbones
Enable Precision Time Protocol (PTP) with hardware timestamping:
bash复制ptp global profile g.8275.1 transport layer2 interface Ethernet1/1-22 ptp enable
3. Secure Multi-Tenant Cloud
Activate MACsec on spine-leaf interconnects:
bash复制macsec cipher-suite gcm-aes-128 key-chain MACSEC_KEYS key 1 cryptographic-algorithm aes-128-cmac key-string 7 094F4A454D494E interface Ethernet1/1 macsec network-link
Procurement and Validation Guidelines
Third-party suppliers like [N9K-X9400-22L link to (https://itmall.sale/product-category/cisco/) offer the module at 30-45% below Cisco’s MSRP. Critical pre-deployment checks should include:
- Firmware Compatibility: Validate NX-OS 9.3(3)F+ support via
show install all impact
- Thermal Modeling: Ensure chassis backplane temperature remains below 60°C during 50G full-mesh traffic
- Breakout Testing: Verify QSFP28-to-4xSFP28 adapter compatibility using
test interface ethernet1/1-22 phy
Strategic Insights for Network Architects
Having deployed the X9400-22L in high-frequency trading environments, its value lies in MACsec-enabled port density – a rare combination in merchant silicon-based line cards. However, organizations prioritizing operational simplicity should note:
For enterprises standardizing on SONiC, the X9400-22L’s limited open API support compared to whitebox alternatives may offset upfront cost savings. The decision ultimately hinges on whether your team can operationalize the trade-offs between encryption performance and vendor-specific troubleshooting workflows.