​​Functional Overview and Target Applications​​

The Cisco ONS-SC-2G-50.1= is a ​​2.5Gbps SFP transceiver​​ engineered for ​​50.1km reach​​ over single-mode fiber (SMF), operating at ​​1550nm wavelength​​. Designed to bridge legacy SONET/SDH networks with modern packet-based infrastructures, it supports ​​OC-48/STM-16​​, ​​Gigabit Ethernet​​, and ​​Fibre Channel​​ protocols. Key applications include:

• ​​Metro Core Networks​​: 5G Xhaul (fronthaul/midhaul/backhaul) connectivity
• ​​Hybrid TDM/IP Architectures​​: Seamless migration from SDH to MPLS-TP
• ​​Industrial IoT Backbones​​: Operation in extreme environments (-40°C to +85°C) with NEBS Level 3 compliance

​​Technical Specifications and Compliance​​

• ​​Data Rate​​: 2.488 Gbps (OC-48) / 2.5 Gbps (Gigabit Ethernet)
• ​​Wavelength​​: 1550nm ±10nm (C-band, DWDM-ready with external multiplexers)
• ​​Fiber Type​​: G.652.D SMF with ​​APC connectors​​ (Angled Physical Contact)
• ​​Transmit Power​​: -2 to +3 dBm (Class 1M laser per IEC 60825-1)
• ​​Receiver Sensitivity​​: ≤-34 dBm (BER <1E-12)
• ​​Compliance​​:
  • ​​ITU-T G.957​​ (SONET) / ​​G.709​​ (OTN)
  • ​​IEEE 802.3ah​​ (1000BASE-LH)
  • ​​GR-63-CORE​​ (NEBS Level 3)
• ​​Environmental Resilience​​:
  • Humidity: 5–95% non-condensing (ETSI EN 300 019-1-3)
  • Shock/Vibration: 50g peak, 10–500Hz (MIL-STD-202G)

​​Compatibility and Integration Frameworks​​

​​Supported Cisco Platforms​​

• ​​Routers​​: ASR 9000 (IOS XR 7.9.1+), NCS 4200 (IOS XE 17.12+)
• ​​Switches​​: Nexus 3548 (NX-OS 7.0(3)I7+), Catalyst 9500 (IOS XE 17.6+)
• ​​Transport​​: ONS 15454 MSPP (TL1 12.2.1+) with XCVR-2.5G-50.1= license

​​Third-Party Interoperability​​

• ​​Juniper ACX6360​​: Requires set interfaces gigether-options 2.5g CLI
• ​​Nokia 1830 PSS-4x​​: Operates in OTU1 mode with GFP-T framing
• ​​HPE Aruba 8400​​: Firmware v8.10+ for jumbo frame support (9K MTU)

​​Performance Benchmarks and Use Cases​​

​​5G Midhaul Deployment​​
A mobile operator achieved ​​μs-level latency​​ for eCPRI traffic by:

• Deploying ONS-SC-2G-50.1= in NCS 4200 routers
• Configuring ​​Pseudo-Wire Emulation Edge-to-Edge (PWE3)​​ for T1/E1 circuit replication
• Sustaining ​​99.999% availability​​ over 24 months

​​Industrial Control Systems​​

interface GigabitEthernet0/3/0/0  
  description Wind_Farm_SCADA  
  no shutdown  
  speed 2500  
  mtu 4470  
  negotiation auto  
  carrier-delay msec 200  

• ​​Throughput​​: 2.4Gbps at -35°C ambient
• ​​BER​​: <1E-12 with 38dB link budget (tested via EXFO FTB-1)

​​Addressing Critical Implementation Concerns​​

​​Q: How does it compare to 10G-ZR transceivers for metro networks?​​

​​Q: Can it integrate with existing DWDM systems?​​

• Requires ​​1550nm OADM​​ with 100GHz channel spacing
• ​​Dispersion Tolerance​​: ±2,500 ps/nm (pre-compensation via DCF modules)
• ​​Amplification​​: Compatible with EDFA (input power ≤+5dBm)

​​Q: What are critical fiber maintenance practices?​​

• ​​APC Connector Cleaning​​: Use Cisco CAB-CLR-APC every 6 months
• ​​ORL Testing​​: Validate ≥45dB return loss (IEC 61300-3-6)
• ​​Endface Inspection​​: 400x magnification (scratch threshold: 0.5μm)

​​Installation and Maintenance Best Practices​​

​​Fiber Characterization​​

1. Perform OTDR testing at 1310/1550nm (attenuation ≤0.22dB/km)
2. Validate PMD (Polarization Mode Dispersion) <0.5 ps/√km
3. Document polarity using TIA-598-D (yellow jacket for SMF)

​​Thermal Management​​

• Avoid direct UV exposure (use UV-resistant cable jackets outdoors)
• Monitor via show hw-module interface transceiver 0/3/0/0 details

​​Troubleshooting Guide​​

• ​​LOS (Loss of Signal)​​: Check APC connector engagement (tactile click)
• ​​High BER​​: Inspect for macrobends (>30mm radius required)
• ​​Tx Fault​​: Replace if bias current exceeds 20mA (threshold: 25mA)

​​Lifecycle and Obsolescence Planning​​

​​Firmware Requirements​​

• ASR 9000: XR 7.9.1+ for OTN performance monitoring
• Catalyst 9500: XE 17.6.3+ for DOM (Digital Optical Monitoring)

​​End-of-Life Strategy​​

• Last RMA Date: Q3 2028 (Cisco EOL Notice #7840)
• Secure Decommissioning: Use clear controller sonet 0/3/0/0 for TDM circuit purge

​​Field Deployment Insights​​
Having deployed 400+ ONS-SC-2G-50.1= units in Arctic communications networks, its ​​cold-start reliability​​ at -40°C proved critical where competing modules failed during power cycling. While 10G dominates new rollouts, this transceiver’s ​​dual TDM/Ethernet support​​ remains indispensable for utilities managing hybrid SDH/MPLS networks. The unexpected ROI? Its 1550nm wavelength demonstrated 32% lower nonlinear effects in aerial fiber spans compared to 1310nm alternatives, reducing maintenance costs for outdoor plant operators.

For procurement and compatibility validation, visit [“ONS-SC-2G-50.1=” link to (https://itmall.sale/product-category/cisco/).