C9606-PWR-BLANK=: Why Is This Cisco Chassis C
Core Function and Design The C9606-PW...
The Cisco CBS350-48P-4X-AU is a 48-port Layer 2 managed switch designed for Australian businesses requiring high Power over Ethernet (PoE) density and multi-gigabit uplinks. Targeting sectors like education, healthcare, and retail, it balances scalability with energy efficiency. Below, we unpack its technical strengths and address common deployment challenges.
Key Features for Demanding Environments
- 48 x PoE+ Ports (740W Total): Supports simultaneous power delivery to devices like Wi-Fi 6/6E access points (30W), IP cameras (15–20W), and VoIP phones (10W).
- 4 x 10G SFP+ Uplinks: Provides high-bandwidth aggregation for data-heavy workflows like video surveillance backups or cloud access.
- Advanced Traffic Management: Features QoS prioritization, VLANs, and static routing (Layer 3 Lite) for granular network control.
- AU Compliance: Built for 230–240V AC operation, certified for Australian EMC/ROHS standards, and optimized for 50Hz power grids.
Technical Specifications
| Attribute | Detail |
|---|---|
| PoE Budget | 740W (30W max per port) |
| Switching Capacity | 136 Gbps |
| Noise Level | 35 dB (typical under full load) |
| Dimensions | 440 x 445 x 44 mm |
Addressing Critical User Questions
Q: Can this switch fully power 48 PoE+ devices?
No. While it has 48 PoE+ ports, the 740W total budget limits simultaneous full-power usage. For example, powering 24x 30W APs would consume 720W, leaving minimal headroom. Plan device loads carefully.
Q: Are the 10G uplinks necessary for small offices?
For basic file sharing, 1G suffices. However, 10G uplinks prevent congestion in scenarios like multi-site video conferencing, large-scale backups, or high-user-density environments (e.g., lecture halls).
Q: How does it handle network security?
Port security, MAC address filtering, and 802.1X authentication isolate unauthorized devices, while DHCP snooping blocks rogue servers.
Practical Deployment Scenarios
- Best For:
- Schools or hospitals needing 40+ connected devices (e.g., APs, IP cameras, digital signage).
- Retail chains with centralized inventory databases or POS systems.
- Avoid If:
- You require advanced Layer 3 routing (e.g., OSPF, BGP).
- Your environment demands redundant power supplies (RPS).
Final Assessment
Having analyzed Cisco’s documentation and real-world deployments, the CBS350-48P-4X-AU is a cost-effective workhorse for Australian organizations prioritizing high PoE density. Its 740W budget accommodates modern IoT ecosystems, though careful power planning is essential. For pricing and availability, explore the CBS350-48P-4X-AU here. While not a fit for hyperscale environments, it eliminates the need for multiple smaller switches in mid-sized deployments, reducing clutter and management overhead.