CAB-AC-16A-SG-UK=: How Does This Cisco Power
Technical Specifications and Safety Compliance...
Overview of the SFP-10G-LR-S=
The Cisco SFP-10G-LR-S= is a 10 Gigabit Ethernet optical transceiver designed for long-range, single-mode fiber (SMF) deployments. Operating at a 1310nm wavelength, this Small Form-Factor Pluggable Plus (SFP+) module supports link distances up to 10 kilometers, making it ideal for metropolitan area networks (MANs), data center interconnects (DCI), and enterprise WAN backbones. While newer 25G/100G optics dominate modern hyperscale environments, the SFP-10G-LR-S= remains a cost-effective solution for legacy upgrades and budget-conscious projects.
Technical Specifications and Compatibility
The SFP-10G-LR-S= adheres to IEEE 802.3ae 10GBASE-LR standards and is equipped with DDM/DOM (Digital Diagnostics Monitoring) for real-time performance tracking. Key specifications include:
- Form Factor: SFP+ (MSA-compliant).
- Fiber Type: Single-mode (OS2), 9/125µm core/cladding diameter.
- Reach: 10 km (6.2 miles) with up to 0.5 dB/km attenuation.
- Power Consumption: ≤1.5W under full load.
- Certifications: RoHS, CE, FCC, and Cisco’s Quality Identification (QID) validation.
Supported Cisco Devices:
- Switches: Nexus 3064-X, Catalyst 3850/4500-X.
- Routers: ASR 1001-X, ISR 4451-X.
- Firewalls: Firepower 4100/9300 with SFP+ slots.
Primary Use Cases and Deployment Scenarios
Metro Ethernet Backbones
Telecom operators deploy this transceiver to connect central offices (COs) within urban areas, leveraging existing OS2 fiber infrastructure. Its 10 km reach bridges facilities without requiring expensive DWDM equipment.
Hybrid Cloud Connectivity
Enterprises use the SFP-10G-LR-S= to link on-premises Nexus switches to colocation facilities hosting Cisco UCS C-Series servers, ensuring low-latency access to hybrid cloud resources.
Installation and Configuration Guidelines
Step 1: Fiber Plant Validation
- Use an OTDR (Optical Time-Domain Reflectometer) to verify fiber integrity and ensure attenuation is <3 dB end-to-end.
- Clean LC connectors with Fujikura CT-30 inspection tools to prevent contamination-related signal loss.
Step 2: Transceiver Activation
- Insert the SFP+ into a compatible slot until it clicks.
- Check DOM values via CLI:
show interface transceiver details - Validate Tx Power (-8.2 to 0.5 dBm) and Rx Power (-14.4 to -1 dBm).
Step 3: Link Optimization
- Enable Forward Error Correction (FEC) on Nexus switches to mitigate BER (Bit Error Rate) over aging fiber.
- Disable auto-negotiation on legacy devices to enforce 10G speed.
Common Operational Challenges and Solutions
Link Flapping or Signal Loss
Causes: Dirty connectors, fiber bends beyond 30mm radius, or outdated firmware.
Resolutions:
- Replace damaged patch cables with OS2-rated LC-LC duplex fibers.
- Upgrade switch firmware to address CSCvy12345 (hypothetical bug ID) SFP+ compatibility patches.
DOM Value Out-of-Range Alerts
Causes: Fiber degradation or incompatible third-party transceivers.
Resolutions:
- Use Cisco-branded optics to avoid “Unsupported Transceiver” errors.
- Install inline optical attenuators if Rx power exceeds -1 dBm.
Comparison with Similar Cisco Transceivers
| Parameter | SFP-10G-LR-S= | SFP-10G-ER-S= | SFP-10G-SR-S= |
|---|---|---|---|
| Reach | 10 km | 40 km | 300 m (OM3) |
| Wavelength | 1310nm | 1550nm | 850nm |
| Fiber Type | Single-mode (OS2) | Single-mode (OS2) | Multi-mode (OM3/OM4) |
| Cost (Relative) | $$ | $$$$ | $ |
Trade-offs: The ER variant offers longer reach but requires dispersion compensation for distances >30 km. The SR is cheaper but limited to intra-data-center use.
Procurement and Compatibility Considerations
Cisco discontinued the SFP-10G-LR-S= in favor of Multi-Rate Optics (MRO), but [“SFP-10G-LR-S=” link to (https://itmall.sale/product-category/cisco/) provides certified refurbished units. Verify Cisco Smart Serial ID authenticity to avoid counterfeit risks.
Final Insights
The SFP-10G-LR-S= exemplifies the “good enough” principle for 10G deployments—reliable but unremarkable in an era of terabit-scale networking. Its enduring value lies in brownfield environments where forklift upgrades are impractical. However, the lack of support for modern features like Flexible Ethernet (FlexE) or coherent detection limits its role in future-proof architectures. For teams balancing cost and performance, this transceiver remains a pragmatic choice, but its eventual phase-out is inevitable. In my experience, it’s a transitional tool, not a strategic asset—deploy it with clear exit criteria as networks evolve toward higher speeds and programmability.